Yt27 Pusher Leg Rock Drill Jack Hammer Pneumatic Portable Drilling Machine

• Customization: Available
• After-sales Service: Quality Assurance Service
• Warranty: 3 Month
• Model NO.: YT27
• Certification: ISO 9001:2008
• Condition: New
• Motor: Pneumatic
• Drill Hole Diameter: 34-42mm
• Drill Hole Depth: 5m(Max)
• Bit Type: Button Bit
• Drilling Way: Rotary
• Air Pressure (MPa): 0.4-0.63
• Water Pressure (MPa): 0.3
• Working Temperature (ºC): -30 to +50
• Shank Specification (mm): H22×108
• Transport Package: Carton/Wooden Box
• Specification: 668*248*202mm
• Trademark: Baptech
• Origin: China
• HS Code: 8467110000
• Production Capacity: 10000sets/Year

Product Description

Product Description

 

YT27 Pusher Leg Rock Drill
Weight	27kg
Dimension(L×W×H)	668×248×202mm
Cylinder diameter	80mm
Piston stroke	60mm
Working pressure	0.4-0.63Mpa
Water pressure	0.3Mpa
Working temperature	-30~50ºC
Air hose inner diameter	25mm
Water hose inner diameter	13mm
Shank size	H22×108mm
Drilling diameter	34-42mm
Max drilling depth	5m
Working pressure	0.63Mpa	0.5Mpa	0.4Mpa
Impact energy	≥70J	≥64J	≥48J
Impact frequency	≥40Hz	≥39Hz	≥37Hz
Air consumption	≤85L/s	≤57L/s	≤50L/s
Torque	≥19N·m	≥16N·m	≥13N·m
Rotation rate	≥300r/min	≥300r/min	≥280r/min
Noise	≤127dB(A)	≤126dB(A)	≤125dB(A)
Drilling speed	≥480mm/min	≥400mm/min	≥300mm/min
Cleanliness	≤850mg
Lubricator	FY250
Weight	1.2kg
Capacity	0.25L
Air Leg	FT160A	FT160B	FT160C
Length	1668mm	1428mm	1820mm
Feeding length	1338mm	1098mm	1490mm
Piston bore	65mm	65mm	65mm
Weight	17kg	15kg	18kg

 

Safety instructions

To ensure the risk of serious injury or death to yourself or others, carefully read through this instruction booklet before putting the rock drill to use. Always follow the instructions given.
 

• Always wear safety helmet, goggles and ear protectors during drilling. Any local regulations that exist must also be observed.
• When drilling in certain minerals, there is a risk of spark generation. Before starting work, check that the machine is approved (in accordance with local regulations) for work under such conditions.
• Check that the hoses used are of the right quality, and that all hose connections are in good condition and properly tightened.
• Before starting work on any of the systems, make sure that the air and water systems are without pressure.
• Make sure that there are no concealed wires or other sources of electricity. Never drill near any electric wires or other sources of electricity.

Staring the rock drill

1. Open the main valve for compressed air.
2. Open the cock for the flushing water.
3. Adjust the feed control lever to given a suitable feed force for collaring the hole.
4. Align the rock drill so that the working tool touches the desired collaring point.
5. Move the throttle lever forward a little, which will start water flushing, percussion and rotation.
6. Collar the hole with reduced feed force.
7. Move the throttle lever fully forward once the working tool has gained a secure footing in the rock.
8. Adjust the feed force by means of the control lever so that the maximum penetration rate is obtained.

Note! Do not bend the working tool as this will increase wear of the shank bushing and piston. Furthermore, it can also affect drilling efficiency and increase the risk of working tool breakage.

Stopping the rock drill
Pull the throttle lever backwards, which will stop percussion, rotation and flushing water.

Detailed Photos