Kgh5aiii 90-130mm 25m Down The Hole Surface Drill Rig

• Customization: Available
• After-sales Service: Quality Assurance Service
• Warranty: 1 Year
• Model NO.: KGH5AIII
• Certification: ISO 9001:2008
• Condition: New
• Motor: Diesel Engine
• Drill Hole Diameter: 90-130mm
• Drill Hole Depth: <100m
• Bit Type: DTH Bits
• Drilling Way: Rotary
• Outer Dimensions: 4700×2240×2100 mm
• Drilling Hardness: F=6-20
• Drilling Diameter: 90-130 mm
• Depth of Economical Drilling: 25 M
• Rotary Speed: 0-200 Rpm
• Climbing Capacity: ≤30°
• DTH Hammer: 3′′
• Drilling Rod: Φ64×2m
• Compensation Length of Beam: 900 mm
• Supporting Power: Yuchai Yc4dk100-T304(73.5kw/2200r/Min)
• Transport Package: Container
• Specification: 4700KG
• Trademark: BAPTECH
• Origin: China
• HS Code: 84306919
• Production Capacity: 300 Sets/Year

Product Description

The KGH5AIII down the hole drill rig for open use is an improved device in compliance with national regulations on environmental protection. Equipped with the Yuchai four-cylinder engine, the drill rig meets the national standards for emissions and environment. The flexible derricking mechanism is suitably qualified for horizontal drilling at a low level. The hydraulic system has been improved, leading to increased system flow and rotary speed. Moreover, the hydraulic cylinder has been optimized, thus making it more reliable; and the additional ring (plate) makes handling and lifting easier.

Technical Parameters

Model of drill rig	KGH5AIII
Weight of complete machine	4700 KG
Outer dimensions	4700×2240×2100 mm
Drilling hardness	f=6-20
Drilling diameter	Φ90-130 mm
Depth of economical drilling	25 m
Rotary speed	0-200 rpm
Rotary torque (Max)	1650 N·m (Max)
Lifting force	18 KN
Method of Feed	Oil cylinder+ leaf chain
Feed stroke	2670 mm
Travelling speed	0-2.5 km/h / 0-3.5 km/h
Climbing capacity	≤30°
Ground clearance	380 mm
Tilt angle of Beam	Down: 105°, up: 12°, total: 117°
Swing angle of boom	Left: 20°, right: 24°, total: 44°
Pitch angle of drill boom	Down: 35°, up: 60°, total: 95°
Compensation length of beam	900 mm
Supporting power	Yuchai YC4DK100-T304(73.5KW/2200r/min)
DTH hammer	3''
Drilling rod	Φ64×2 m
Air consumption	10-17 m³/min
Dust collector	standard configuration QZA-90(8 filter element)
	alternative configuration QZA-120(12 filter element)
Note: When the hole diameter of the dust collector exceeds 90mm, the dust collector must be upgraded and enlarged.

KG Down The Hole Drill Rig For Open Use

                                  KG420S/KG420SH                            KG420T/KG420TH                                      KG430/KG430H

                                    KG510/KG510H                                          KG520/KG520H                               KG590/KG590H

                               KG726III/KG726HIII                                      KGH5AIII                                   KG420B/KG420BH